Matters needing attention in the production of aluminum coated aluminum sheet

With the continuous development of our country's architectural decoration industry, our aluminum veneer manufacturers are more and more favored by interior decoration designers, and are widely used in ceilings and walls of interior high-end decoration projects. Next, our aluminum veneer manufacturers will introduce to you what should be paid attention to when processing aluminum veneers.


1. As a high-grade decorative material, the production and processing levels of domestic manufacturers of fluorocarbon sprayed aluminum veneer are quite different. Special attention should be paid to the inspection of manufacturers before ordering, inspecting their production capacity and scale, engineering performance, and focusing on their technical design capabilities. Do not use low-level and small-scale processing factories because of low prices, otherwise it will bring great difficulties to construction and management, and serious consequences will cause irreparable economic losses.

2. As an important process before the processing of fluorocarbon sprayed aluminum veneer - on-site data measurement, it is recommended to use an infrared rangefinder for measurement. If the traditional tape measure is used, there will be measurement errors, which will have a very adverse effect on the aluminum plates that require tight seam splicing.

3. When processing fluorocarbon sprayed aluminum veneers, all aluminum panels should not be processed at one time, and the last aluminum panel and corner panels in each installation area should not be processed temporarily until all fluorocarbon panels in this area are processed. After the sprayed aluminum veneer is installed, the on-site data measurement is carried out again, and the accurate size is reprocessed to avoid unnecessary rework and economic loss.

4. Although the fluorocarbon sprayed aluminum veneer is a kind of metal decorative panel, its fluorocarbon sprayed layer is easy to scratch. Therefore, in addition to requiring the aluminum plate of the manufacturer to enter the site with a protective film, it is also important to avoid scratches and heavy objects during the handling and installation process, otherwise it will seriously affect the overall appearance of the aluminum plate.

5. For the installation method of fluorocarbon sprayed aluminum veneer paste, the most common and most difficult quality problem to solve is the uneven joint between blocks, which should be paid enough attention to. In addition to paying attention to the uniform and consistent thickness of the adhesive during the construction process, the temporary fixing measures should not be removed prematurely, usually not less than 12 hours.

The aluminum veneer produced by our aluminum veneer manufacturer, with its excellent color resistance, corrosion resistance, strong anti-ultraviolet ability, strong crack resistance and ability to withstand harsh weather conditions, in addition to a large number of high-rise building curtain walls In addition to its application, it is also favored by consumers for its wide range of color options, good metallic gloss, and strong impact resistance.