Wood grain thermal transfer aluminum veneer

Wood grain thermal transfer aluminum veneer is a kind of aluminum veneer. The difference is that different surface treatments are used. The general surface treatment of pillar-coated aluminum veneer includes: powder spraying, polyester spraying, fluorocarbon spraying, wood grain thermal transfer, Aksu spraying. These are the most commonly used surface treatments in the market and engineering.
Process of wood grain thermal transfer aluminum veneer:



1. Measure the size on the spot, the designer should make a good drawing and deepen it.
2. Sheet metal blanking, mechanical drawing lines, stamping or cutting angles, punching or carving or arc rolling process if there is a pattern, and finally planing grooves and folding according to the thickness of the board.
3. The blank product enters the assembling and welding production process, the studs are installed on the back of the board, and the welding is carried out in the welding position grinding workshop, and then the fine grinding and polishing.
4. Surface pre-treatment, spraying treatment (acid-eluting grease), plate chrome treatment (anti-oxidation), imported primer spraying, high-temperature baking curing treatment.
5. Spray imported primer, solidify at high temperature, apply glue layer after cooling, paste wood grain paper imported from Italy, and place in air-cooled place until the paper is dry.
6. After the wood grain paper is dried, it is cured at high temperature in an oven, and the pattern on the wood grain is transferred to the primer to get the wood grain thermal transfer aluminum veneer.
7, product protection, product surface protection film, paper leather corner packaging, bubble film packaging, wooden box packaging.

Formation mechanism of heat transfer printing wood grain aluminum ceiling formation mechanism of heat transfer printing wood grain ink transfer penetration.In the process of curing, printing film on aluminum vacuum is formed on the surface...

1. Introduction of wood grain sublimation aluminum sheet First, the background color of the aluminum plate is sprayed to the color background color selected by the customer, and then a very thin chemical film is applied to the background color of the ...

Wood grain transfer aluminum veneer is aluminum products after the transfer of wood grain products, the surface has a very realistic wood grain processing effect, and after the treatment, the product surface has excellent resistance to the sun, wear a...

Wood grain color coated aluminum honeycomb panel is a plate made by two aluminum panel panels firmly adhered on both sides of a thick honeycomb core material. Honeycomb panel series has rich product specifications and can provide a variety of panel sh...